- Double-edged saw.
- For cutting materials 4-30 mm thick.
- Suitable for straight and curved cutting.
- CR-V steel - flexible, long-lasting and sharp.
- Cross-sharpening of the teeth - more efficient drilling and less stalling.
- Made in Germany.

Dimensions:

- A = 2,5 mm (10 TPI)
- B = 75 mm
- C = 100 mm
- D = 1,45 mm
- E = 8 mm

Tool used:

- For cutting natural and processed wood.
- For cutting laminated wood.
- For cutting plywood.
- For cutting laminated fibreboards.

- For cutting materials 4-100 mm thick.
- CR-V steel - flexible, long-lasting and sharp teeth.
- Made in Germany.

Dimensions:

- A = 4 mm (6 TPI)
- B = 110 mm
- C = 132 mm
- D = 1,45 mm
- E = 8 mm

Tool used:

- For cutting medium density fibreboard (MDF).
- For cutting polyvinyl chloride (PVC).
- For cutting fibreboards for construction.
- For cutting wood.

- BIMETAL alloy - the teeth are highly resistant to chipping.
- For cutting materials with a thickness of 1,5-5 mm.
- Made in Germany.
- Reversible sharpening of the teeth for clean cutting.

Dimensions:

- A = 1,9 mm (13 TPI)
- B = 55 mm
- C = 80 mm
- D = 1,27 mm
- E = 8 mm

Tool used:

- To cut laminate from the good side.

- BIMETAL metal alloy with 8% cobalt - extra strong teeth.
- For cutting materials with a thickness of 3-100 mm.
- Larger tooth spacing at the tip for faster cutting, less
less vibration.
- Made in Germany.

Dimensions:

- A = 1,8-2,5 mm (10-14 TPI)
- B =110 mm
- C = 132 mm
- D = 1,27 mm
- E = 8 mm

Tool used:

- For cutting wood.
- For cutting wood with nails.
- For cutting hard wood.
- For cutting steel.
- For cutting profiles.
- For cutting tubes.
- For cutting stainless steel.

- Curved and sharply sharpened teeth efficiently cut longer
longer distances.
- For cutting materials 5-50 mm thick.
- The teeth are designed for rough cutting, giving more speed.
- Does not overheat during long working hours.
- CR-V steel - flexible, stays sharp for a long time.
- Made in Germany.

Dimensions:

- A = 4 mm (6 TPI)
- B = 75 mm
- C = 100 mm
- D = 1,25 mm
- E = 8 mm

Tool used:

- For cutting wood.
- For cutting Oriented Strand Board (OSB).
- For cutting plywood.

- CR-V steel - flexible, long-lasting and sharp.
- For cutting materials 3-30 mm thick.
- Made in Germany.

Dimensions:

- A = 2,5 mm (10 TPI)
- B = 75 mm
- C = 100 mm
- D = 1,45 mm
- E = 8 mm

Tool used:

- For cutting wood.
- For cutting upholstered panels.
- For cutting oriented strand board (OSB).
- For cutting polyvinyl chloride (PVC)
- For cutting medium density fibreboard (MDF).
- Cutting laminate on the good side.

- For cutting 1-3 mm thick materials.
- High-speed steel.
- Made in Germany.
- Clean cutting thanks to the more curved teeth at the tip.

Dimensions:

- A = 1,2 mm (21 TPI)
- B = 50 mm
- C = 75 mm
- D = 1 mm
- E = 8 mm

Tool used:

- For cutting thin metals.
- For cutting profiles.
- For cutting stainless steels.

- CR-V steel - flexible, long-lasting and sharp.
- For cutting materials 5-50 mm thick.
- The teeth are designed for rough cutting, giving more speed.
- Made in Germany.

Dimensions:

- A = 3 mm (8 TPI)
- B = 75 mm
- C = 100 mm
- D = 1,25 mm
- E = 8 mm

Tool used:

- For cutting Oriented Strand Board (OSB).
- For cutting particleboard.
- For cutting plywood.
- For cutting fibreboard.

- CR-V steel - flexible, long-lasting and sharp.
- For cutting materials 10-45 mm thick.
- Made in Germany.

Dimensions:

- A = 4 mm (6 TPI)
- B = 75 mm
- C = 100 mm
- D = 1,45 mm
- E = 8 mm

Tool used:

- For cutting polyvinyl chloride (PVC).
- For cutting upholstery panels.
- For cutting medium density fibreboard (MDF).
- For cutting particleboard.
- For cutting wood.

- The reversed teeth ensure a clean cut.
- For cutting materials with a thickness of 3-30 mm.
- CR-V steel - flexible, stays sharp for a long time.
- Made in Germany.

Dimensions:

- A = 2,5 mm (10 TPI)
- B = 75 mm
- C = 100 mm
- D = 1,45 mm
- E = 8 mm

Tool used:

- For cutting upholstery panels.
- For cutting plywood.
- For cutting medium density fibreboard (MDF).
- For cutting oriented strand board (OSB).
- Cutting polyvinyl chloride (PVC).
- For cutting wood.
- Cutting laminate on the good side.

- For cutting materials with a thickness of 2.5-6 mm.
- High Speed Steel (HSS).
- Made in Germany.

Dimensions:

- A = 2 mm (12 TPI)
- B = 50 mm
- C = 75 mm
- D = 1 mm
- E = 8 mm

Tool used:

- For cutting non-ferrous metals.
- For cutting thin metal plates.
- For cutting steel.

- Fine and very sharp teeth - no splinters, very clean cut.
- CR-V steel - flexible, stays sharp for a long time.
- For cutting materials 2-20 mm thick.
- Made in Germany.
- Suitable for curved cutting.

Dimensions:

- A = 1,3 mm (20 TPI)
- B = 50 mm
- C = 75 mm
- D = 1,25 mm
- E = 8 mm

Tool used:

- For cutting laminate.
- For cutting plywood.
- For cutting wood.

- For materials up to 65 mm thick Dimensions.
- Larger tooth spacing at the tip for faster cutting, less
less vibration.
- CR-V steel - flexible, stays sharp for a long time.
- Made in Germany.

Dimensions:

- A = 2,5-3,2 mm (8-10 TPI)
- B = 90 mm
- C = 115 mm
- D = 1,45 mm
- E = 8 mm

Tool used:

- For cutting wood panels.
- For cutting boards.
- For cutting particleboard.
- For cutting softwood.
- For cutting heartwood veneer.
- For cutting laminate.

- Longer than a normal saw with large teeth.
- CR-V steel - flexible, stays sharp for a long time.
- For cutting materials up to 65 mm thick.
- Made in Germany.

Dimensions:

- A = 3 mm (8 TPI)
- B = 90 mm
- C = 115 mm
- D = 1,45 mm
- E = 8 mm

Tool used:

- For cutting wood.
- For cutting particleboard.
- For cutting plywood.
- For cutting laminate.

- For cutting 1-3 mm thick materials.
- High-speed steel.
- Made in Germany.

Dimensions:

- A = 1,2 mm (21 TPI)
- B =110 mm
- C = 132 mm
- D = 1,15 mm
- E = 8 mm

Tool used:

- For cutting steel.
- For cutting profiles.
- For cutting metal sheets.
- For cutting soft metals.
- For cutting stainless steel.
- For cutting metal pipes.

- For cutting materials from 5 to 50 mm thick.
- CR-V steel - flexible, long-lasting and sharp.
- Made in Germany.

Dimensions:

- A = 4 mm (6 TPI)
- B = 75 mm
- C = 100 mm
- D = 1,45 mm
- E = 8 mm

Tool used:

- For cutting Oriented Strand Board (OSB).
- For cutting plywood.
- For cutting medium density fibreboard (MDF).